Pan-Fried Salmon With Green-Coconut Chutney

By Nik Sharma

Updated Sept. 4, 2020

Pan-Fried Salmon With Green-Coconut Chutney
Nik Sharma for The New York Times (Photography and Styling)
Total Time
25 minutes
Rating
4(181)
Comments
Read comments

Coastal flavors from India permeate this crispy-skin salmon. The coconut chutney carries the buzz of ginger and green chile, while a drizzle of tadka — a hot, bright red oil infused with mustard seeds, curry leaves and Aleppo flakes — is the crowning glory of the dish. For perfectly crisp skin, resist the urge to fidget with the fish until the appropriate amount of time has passed; the skin will start to crisp at the edges and the fillet will release with ease. Use fresh or frozen coconut to make the chutney. (Desiccated coconut simply doesn’t work as well here.) You can use freeze-dried curry leaves instead of fresh, but you might need to double or even triple the amount, as their intensity is noticeably weaker in comparison.

  • or to save this recipe.

  • Subscriber benefit: Give recipes to anyone

    As a subscriber, you have 10 gift recipes to give each month. Anyone can view them - even nonsubscribers. Learn more.

    Subscribe

  • Share this recipe

  • Print this recipe

Advertisement

Ingredients

Yield:2 servings

    For the Chutney

    • 1cup packed fresh or frozen (thawed) grated coconut
    • 1cup packed cilantro stems and leaves
    • 1fresh, hot green chile, such as a serrano or Thai chile, stemmed
    • 2tablespoons grated fresh ginger
    • 2tablespoons lime juice
    • Kosher salt

    For the Salmon

    • 2skin-on salmon fillets (about 6 ounces each)
    • 1tablespoon ghee or unsalted butter
    • 1tablespoon olive oil
    • Kosher salt

    For the Tadka

    • 2tablespoons grapeseed or canola oil
    • 1teaspoon black or brown mustard seeds
    • 10 to 12fresh curry leaves (or 25 to 36 dried curry leaves)
    • 1teaspoon red-pepper flakes, such Maras, Urfa or Aleppo
Ingredient Substitution Guide
Nutritional analysis per serving (2 servings)

754 calories; 63 grams fat; 23 grams saturated fat; 0 grams trans fat; 23 grams monounsaturated fat; 12 grams polyunsaturated fat; 11 grams carbohydrates; 5 grams dietary fiber; 4 grams sugars; 37 grams protein; 656 milligrams sodium

Note: The information shown is Edamam’s estimate based on available ingredients and preparation. It should not be considered a substitute for a professional nutritionist’s advice.

Powered by

Preparation

  1. Step 1

    Prepare the chutney: In a food processor, blend the coconut, cilantro, chile, ginger and lime juice with 2 to 3 tablespoons of water for a couple of seconds to get a coarse mixture. Add a little water (about 1 tablespoon) if needed to loosen. If you prefer a smoother texture, blend the ingredients in a high-speed blender until smooth. Taste and season with salt. Transfer to a bowl. (This chutney can be made a day in advance and stored in an airtight container in the refrigerator for up to 3 days.)

  2. Step 2

    Prepare the salmon: Place the salmon skin-side down on paper towels. Heat the ghee and oil together in a medium skillet over medium and swirl the pan to coat the surface well. When the pan is hot, season the fillets on both sides with salt and place them in the skillet, skin-side down. Reduce the heat to medium-low and let the fish cook undisturbed for 8 minutes, until the edges of the skin start to turn crispy and golden brown.

  3. Step 3

    Tilt the skillet slightly and, using a spoon, collect the hot fat that collects at the edge and ladle it over the top of the fish several times. Continue basting the fish until the tops turn opaque and a digital thermometer inserted into the center of the fish reads 125 degrees, about 2 minutes. (The exact cooking time will vary depending on the thickness of the fillet.) Use a spatula or a pair of kitchen tongs to carefully release the fish from the pan. (It should release easily if the skin is crisp.)

  4. Step 4

    To serve, divide the chutney between two serving plates. Place the cooked fish on top, skin-side up.

  5. Step 5

    Prepare the tadka: Heat the oil in a small saucepan over medium. When the oil is hot, drop in one or two mustard seeds; they should sizzle if the oil is hot enough. Add the remaining mustard seeds and swirl. The seeds should pop, and turn fragrant in 30 to 45 seconds. Add the curry leaves and cover the saucepan with a lid, swirl the contents of the saucepan, cook for 15 seconds until the curry leaves release their aroma. Remove from heat, add the red-pepper flakes and let the mixture sit for 1 minute. Pour the oil and spices over the fish and the chutney. Serve immediately.

Private Notes

Leave a Private Comment on this recipe and see it here.

Ratings

4 out of 5
181 user ratings
Your rating

or to rate this recipe.

Have you cooked this?

or to mark this recipe as cooked.

Comments

Stephanie

I am sure they won’t have the same effect, but can one use dried curry leaves in place of the fresh curry leaves? I don’t have access to fresh curry leaves, unless I order online.

Dk

Hope some home or pro chefs who have made this chutney with dried coconut write in to share their methods -- eg presoaking, large or small cut coconut, addition of coconut or other oil ... or just forging ahead with the dried coconut as written ( Despite Nik Sharma's caveat not to do so) . I've used fresh coconut in other similar recipes, but find it adds a lot of time to the preparation.

Deepti

Just to clarify, the tadka *can be* a "hot, bright red oil", but not exclusively so. This is just one kind. Tadka is the technique of tempering, whereby whole spices, powders, chillies or leaves are roasted briefly in a hot oil or ghee to release flavours before being poured over the dish. If red chilli goes into it, it'll be red, but if it's a curry leaf and chana dal tadka, there won't be much of a colour at all, certainly not red.

Alyson

Flavors were superb! Five stars. Restaurant quality dish. Would make again. Two improvements to work on for next time: 1) the chutney turned out a bit more crumbly/paste like as opposed to smooth. Not sure how to correct that - other than trying the blender method next time. I used a food processor and thought blending it for a longer period of time might break down the oils in the coconut, but no. 2) the basting technique does not work that well on induction bc the oil cools when you tilt the pan to baste. We improvised by putting the pan back down for a few seconds to let the oil heat up again between bastes, but this is quite a time consuming process, longer than 2 minutes. Especially when you’re hungry and want to get dinner in the table. Finally we got impatient and flipped the salmon over to finish it off for 2 minutes. Still turned out fine. Any pointers for these two issues? Also, how to adapt this for 4 ppl. Seems impossible unless you do it in batches, and that’s not ideal for company.

Rahul

So, so, so good. I used dried desiccated coconut and fresh curry leaves (I have a plant) but dried should work fine.

Monica

If you can't find curry leaves, I think sage leaves would be a good substitute.

Private comments are only visible to you.

Recipe Tags

or to save this recipe.